OMAIC Substitute Voice Remote Control L5B83H for TV Stick TV Cube for Insignia Stick Japanese Manual Included 2/3, 1/2/3

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. [Packaging contents] Remote control x 1. Instructions x 1. No batteries included. *Please use two brand new AAA batteries with the same part number. [Pairing method 1] If the original remote control is lost or unusable: If you have the remote control and can still use it. ①Remove the batteries from the original remote control ②Insert two AAA batteries into the new remote control ③Open the TV, press the settings button to go to the remote control management page, and while facing the TV within 3 meters, press and hold the ``Back'' + ``Menu'' + ``Left'' buttons on the remote control at the same time for at least 30 seconds. Continue and reset the new remote ④ Unplug the device and reinsert it after 5 seconds, select HDIM input ⑤ Wait until the TV shows the pairing error "Remote control not detected", then press and hold the home button on the remote until pairing is successful [Pairing method 2] If the original remote control is still usable: 1. Insert new batteries into the new remote control, use the original remote control, and select the gear mark on the right on the Fire TV screen. 2. Select Controllers & Bluetooth Devices, then select Amazon TV Remotes ＞ Add New Remote. 3. After you start searching, press and hold the Home button on your new remote. When the new remote control appears in the list, the connection is complete. Or follow the page instructions and use the original remote control to complete pairing by pressing the OK button. [Settings for power, volume, etc.] If the power, volume, and mute buttons do not respond, follow the steps below to set them: From the TV home screen, go to Settings ＞ Device Control ＞ Device Management ＞ TV ＞ Change TV ＞ Do you want to change TV? ＞ Change TV ＞ Check the detected TV brand and select "No" or "Yes" ＞ Select the correct brand, confirm, and complete. [Note] Please be sure to remove the battery of the original remote control before pairing. Otherwise, pairing may fail. If the red light flashes when you press the button on the new remote control, reset the remote control [How to reset the remote control] You need to take out the batteries of the original remote control. After turning on the TV, press the settings button to go to the remote control management page, reinsert the batteries in the new remote, and while facing the TV within 3 meters press and hold the "Menu", "Back" and "Left" buttons on the new remote at the same time, then release after 30 seconds. OMAIC remote control