0- Intelligent Regulation Free of Dismantling LED Backlight Test Tool

Features: Use STM8 high-speed single-chip microcomputer to do voltage sampling test, and drive LED light to display voltage, realize board integration, reduce the defect rate (because the current is constant, there is only voltage display function). 0-300V adaptive voltage, suitable for most series and parallel lamp bead test. During the test, the progressive start mode is adopted, the voltage is automatically adapted, and the current is gradually increased, so the lamp bead will never be burned, and the normal brightness can be achieved after three to five seconds. Even if the light bar and the lamp bead are reversed, the light bar and the lamp bead will not be burned. The digital display shows the real-time voltage output with an adjustable voltage inside, and the voltage value can be self-corrected. The digital meter uses a green light-emitting tube. When it is displayed as 00, it indicates a short circuit, and when it is 300V, it indicates an open circuit. Each group of LED strips on the same LCD TV should display the same voltage. Cold and heat isolation, no electric shock. The power cord and the case are designed in one piece, which is easy to carry out. The brightness is higher than the market"s similar highlight version of 30percent ! Can test any size LED backlight and lamp bead. You can illuminate the LCD TV screen without disassembling the screen. (The screen with the bad lamp bead is lit up. The LCD TV is generally divided into several groups in parallel. It can be seen by the voltage which group of voltages is different, so as to determine which group of LED lamp beads are damaged). Specifications: Plug: US Plug EU Plug (Optional) Input voltage: 85-265V (international) Output voltage: 0-300V, power 25W Size: approx. 100 x 60 x 30mm 3.9 x 2.4 x 1.2in Material: ABS Weight: approx. 138 g Product use: Widely used in the repair and inspection of LCD TVs and monitors. Package Iist: 1 x SFD290 LED Tester 2 x Watch hand Note: When testing, because it is a high-bright version, do not look directly at the lamp bead to avoid eye damage.