Portable Mini Air Angle Die Grinder Pneumatic Engraving Machine Air Grinding Tool

Feature: 1. The sealed ball bearing design prevents the entry of contaminants and lubricants. 2. Small size, high power, suitable for working in small spaces. 3. The right?angle design can achieve tight or angular grinding operations. 4. Lightweight zinc alloy body, low?vibration design, reduce hand fatigue. 5. High-quality gear and ball bearing structure extend the life of abrasive tools. Specification: Item Type: Pneumatic Grinder Material: Zinc Alloy Color: As shown in the picture Weight: Approx.877g/30.9oz Product Speed: 22000rpm Product Chuck Size: Approx.3mm / 0.12in, 6mm / 0.24in Air Inlet: 1/4 Air Consumption: 0.2m3/min Application: Home decoration, handicraft polishing, rough edge trimming, etc. How to Use 1. Carry out a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality. 2. During operation, the gas pipe must be placed at the back end to prevent accidents. 3. Hold the machine with both hands during work and ensure a stable footing. 4. If the gas stops suddenly during work, the switch must be set to the off state immediately. 5. During the grinding and polishing process, apply even force, and it is strictly forbidden to apply too much force or hit the object. . Package List: 1 x Pneumatic Grinder2 x Chuck1 x Air Connection2 x Wrench 1 x Instruction Manual Note: 1. Please allow 1‑2mm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.