We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products.
【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction.
【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed.
【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product.
【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer.
【Gigabit PoE Passthrough】4 PoE output gigabit ports include 1 PoE, 10/100/1000Mbps rate. Powered by PoE network, no AC power required.
[IEEE 802.3 af/at/bt] Standard PoE, port 1 input maximum 90W (IEEE802.3bt), port 2 output 60W (IEEE802.3bt), port 3-5 output maximum 30W (IEEE802.3at), supports PoE voltage 44-57 Vdc. PoE pins: Input: 1/2(+), 3/6(-), 4/5(+), 7/8(-), Output port 2: 1/2(+), 3/6(-), 4/5(+), 7/8(-), Output port 3-5: 1/2(+), 3/6(-)
[VLAN mode] Supports VLAN mode and is controlled by dip switch. Turning on the VLAN function will isolate POE output ports 2-5 from each other, improving network security and increasing port utilization.
【Plug and Play】Support power detection, automatically detect the device, just plug in the Ethernet cable, connect directly to the device, and LED display the port status without any configuration. *24V passive PoE is not supported*.
【Easy to install】Support wall mounting and din rail. Small size saves space. Suitable for many positions. 3-level cascading support. You can connect Poe APs, cameras, phones and other POE devices to extend your POE coverage at low cost.
Gigabit PoE Pass-through Switch, 4PoE Output Extender, IEEE802.3af/at/bt PoE Power 90W, 10/100/1000Mbps Ethernet, DIN Rail & Wall Mount Plug and Play.
