DDS Function Generator Low Frequency Sine Square Triangular Sawtooth Waveform Signal Generator

Feature： 1. TEST WAVEFORM： The signal generator can test a variety of waveforms, such as sine wave, square wave, triangular wave, forward and reverse sawtooth wave. 2. MULTIPLE USAGES： Can be paired with an oscillometer to test and debug the frequency response and pulse response of electronic circuits and o amplifiers. 3. HIGH ACCURACY： Due to its excellent DSS accuracy and frequency stability, it can also be used to calibrate the scanning time factor of oscillometer. 4. FREQUENCY RANGE： The frequency range of the sine wave is 1-500kHz, the frequency range of other waveforms is 1-20kHz, has a wide range of applications. 5. EASY OPERATION： The low frequency signal generator has a clear display and simple buttons, making it easy to operate, convenient and practical. Specification： Item Type： Function Generator Material： ABS Frequency Range： Sine Wave： 1-500kHz (where the frequency with flat output amplitude reaches 200kHz, the output amplitude will decrease as the frequency further increases) Other Waveform： 1-20kHz (the upper limit of adjustable frequency is not limited, and if there is no high requirement for distortion and shaking, the frequency can be further increased) Resolution： 1Hz Output Waveform： Sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave Sine Wave Distortion： <1percent below 1kHz, <0.5percent above 1kHz Output Amplitude： Maximum +-10V (P-P) Output Impedance： 50 Ohms DC Offset： Maximum +-10V, related to closing function. Package List： 1 x Signal Generator1 x Power Cord1 x Mini Clip Cable1 x User Manual