PARKVISION Highly Sensitive Front Camera That Can Be Seen Even In the Dark Rear Camera 1 Million Pixels Rear Horizontal Vertical Angle Minimum

1. High-sensitivity vehicle-mounted camera that can be seen even in the dark: Based on military-grade chips and unique noise reduction technology, it achieves ultra-strong night vision with a minimum illuminance of 0 Lux, allowing you to see even in completely unlit areas using just a lamp. Adopting a highly sensitive CMOS sensor, it provides high-definition images day and night. Recommended as a nighttime measure, especially for those who often drive at night. 2. Realistic wide-angle camera of 172° horizontally and 95° vertically: The rear wide-angle lens of 172° horizontally and 95° vertically (100% actual measurement data) captures the road surface in front or behind you further and wider, reducing blind spots when driving. This camera is recommended for people who often pass through areas where visibility is difficult from the driver's seat or for people who live in densely populated areas. It uses a 6-layer all-glass lens that has higher heat resistance than plastic and prevents blurring, making it scratch resistant and extremely durable. 3. Compatible with front and back: The camera body wire has been extended to 4m, and the total length of all wiring has reached 12m. Waterproofing of the connections is no longer required. A 2m high-temperature-resistant corrugated tube is also included to prevent defects such as the fuse coming off due to the high temperature of the camera body wire inside the car. It is long enough for both the front and back cameras, making it easily compatible with long vehicles. When shipped from the factory, it is set to normal image, but you can switch to mirror image by connecting the included blue wire. 4. High-quality materials: The metal outer shell and metal stays that can be adjusted at will look more luxurious than plastic ones. It reaches the international waterproof and dustproof standard of IP69K and prevents water droplets and dust from entering the camera, making it suitable for outdoor activities and severe environments. Can be used in rainy weather or when washing the car. 5. Multi-angle adjustable: You can adjust the bracket position according to the installation location. Even after installation, the camera can be adjusted to the optimal viewing angle. The camera bracket is made of stainless steel material, so you don't have to worry about it rusting. Product specifications: Type: Automotive front/front camera Resolution: 1.3 million (PS: uses a megapixel chip, but the camera's composite signal system is CVBS, so the image quality will be compressed to a certain degree) Viewing angle : Horizontal 172° Vertical 95° Body weight: 33g Dimensions: 25(W) x 25(H) x 25(D) Output image: Normal image (can be switched to mirror image) Guidelines: None Sensor: : 1/3” HD CMOS Voltage: DC5V-12V Current consumption: