Makita 100mm Rechargeable Disc Grinder 40Vmax Sold Separately GA045GZ Battery/Charger/Case

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ Replacing the whetstone is easy and quick. [X-LOCK] adopted 40Vmax rechargeable disc grinder. Tip tools can be attached and detached with one touch. Tip tool installation without mistakes. Shape that can only be installed in a certain direction. Cutting capacity exceeding that of AC machines*. Equipped with high power brushless motor. It delivers full power at a rotational speed of 8,500min-1. For work that requires heavy loads. *Compared to Makita 100mm AC machine. Cutting speed increased by approximately 40%*. *Compared to Makita 100mm AC machine. Reduction of recoil due to kickback. It detects a sudden drop in rotation speed due to kickback and stops. *Note: This function does not prevent kickback itself. Paddle switch + brake. If you release the switch, it will stop suddenly. Reboot prevention function. Even if you insert the battery by mistake, it will not start. Waterproof protection grade IPX6. *Products with IP marking are designed to be less susceptible to dust and water, but this does not guarantee that they will not malfunction. If a battery is installed, the protection level of the main unit will apply. Wheel cover adjustment/removal. Adjustment and attachment/detachment are possible just by pressing the release lever. Can be ground at a flat angle. There is little protrusion on the flange. DC 36V (40Vmax), sliding Li-ion battery specifications. Battery and charger sold separately. Grinding wheel dimensions: outer diameter 100mm, thickness 6mm (installable grindstone thickness 3.5-6mm), inner diameter 22.23mm. Rotation speed: [revolutions/min] 8,500. Work amount per charge (estimated when BL4040 is installed): Concrete creasing (cutting depth 10mm) approximately 21.6m Body length: length 418mm x width 117mm x height 162mm. Mass: 3.1kg (when BL4040 is installed)