【HIGH QUALITY】Long life-span matters, that is why our cable is made of high-quality material which prevent rust and premature failure to ensure it can work for a long time
【DESIGN】The transfer cable linkage shifter uses a clevis mount on both ends of the cable to align the push/ pull force directly in line with the cable, providing a much more robust double shear force
【FEATURE】The transfer case cable shifter get rid of the problematic stock shifter linkage, to provide a smooth Shifting for your car
【FITMENT】Works on For 1997-2006 Wrangler, only fits the 231 transfer case, will not fit a Rubicon. The gear shift linkage bushing kit is attaches to the base of the OEM handle and the bracket is coated with black powder, which is not easy to rust
Features:
Condition: New
Part Number: J0048041
Meet or exceed strict quality requirements
Replaces the problematic stock shift mechanism
Heavy duty cable and zinc plated steel provide smooth shifting
Compatible with For 1997-2006 Jeep Wrangler TJ
Only fits the 231 transfer case, will not fit a Rubicon
Installation:
1. From inside the vehicle pull up the carpet and remove the 4 1Omm bolts that hold the stock shifter bushing mount
2. Support the transmission underneath the vehicle by using a transmission jack or a jack stand and a piece of wood under the pan
3. Remove the factory skid plate crossmember and set to the side
4. Remove old shift linkage at shifter by using a body panel removal tool. You may need to cut the stock plastic bushing on the side that sticks out (do not remove the bushing)
5. Remove the two 9/16 nuts from the transfer case that hold on the stock bracket
6. Remove the nut holding the stock shifter arm to the transfer case and save the nut and washer. You may need to pry lightly to remove the stock shifter am
7. After the old linkage is removed replace the upper nut on the transfer case as your new bracket will bolt to the bottom two studs of the transfer case
8. Install your new shifter arm to the transfer case by reusing the stock nut and washer
9. Install the new body mounted bracket using the 4 % SS bolts from inside the vehicle. You may need to get all 4 bolt threads started before tightening any of them down fully because of the shape of the body
10. Install the transfer case bracket on the bottom two studs of the transfer case and make sure all your bolts are tight before installing the cable
11. Install the shifter cable on the bracket. Use the quick release pins provided to connect the cable to the shifter and the transfer case shifter arm
12. Adjust the cable length until all gears engage correctly
