Features:
This LED ground light is designed to vehicle and pedestrian to right direction.
Viewing distance up to 500 meters, which can effectively provide the driver with safe driving direction.
Solar power design, using LED as light source, energy saving and environmentally friendly.
It is recharged by solar panels under sun light, automatic charging during the day, automatic lights up at night.
Durable casting aluminum construction can deal with the outdoor environment, durable and waterproof.
With
large reflective light brightness. The reflective light brightness can
reach 2000mcd, which is 6 times~7 times that of the ordinary spike
light, and the lamp bead is more than 6000cmd.
Active
lighting, not only can avoid the interference of rain and fog to the
greatest extent, but also can make the driver"s line of sight get rid of
the dependence on the car lighting, the visual distance is farther, the
effect is better.
Specification:
Condition: 100percent Brand New
Material: Diecast aluminum housing + reflective sheet + PC
Solar panel: 2.5V120MA monocrystalline silicon
Energy storage device: 1.2V600MAH NIMHhigh temperature resistant NIMH battery
Working
duration: charged a day under standard light intensity, it can work for
40 hours; the battery can work continuously for more than 72 hours
after being fully charged
Light mode: flashing or constantly bright
Light color: Blue
Light source: 6 * 5MM super bright antifog LED lights
Visible distance: >500 meters
Illuminance: 400500Lux
Lifespan: 35 years
Working environment: 20 degrees C ~ +70 degrees C
Waterproof: IP68
Static crush resistance: more than 20 tons
Installation Steps:
1.
Positioning: Firstly, use the ruler to determine the installation
position, ensure that the longitudinal position of each position is on a
straight line, the installation distance and design requirements shall
prevail, and the installation site shall be flat, dry, clean and
seamless.
2.
Mixing glue: using dedicated A glue and B glue, A glue and B glue ratio
is 1:1 (such as: 1 kg A glue, 1 kg B glue) glue must be evenly mixed,
consistent color.
3.
Applying glue: the road surface should be cleaned during installation,
the glue should be moderate, not only stick to the ground, but also do
not overflow too much, about 40 grams of glue per lihgt, apply glue to
the bottom of the road sign. Clean up the road debris after
installation.
4. Patrol: check the installed spike lights after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.
Package list:
2 * Road Ground Lights
This LED ground light is designed to vehicle and pedestrian to right direction.
Viewing distance up to 500 meters, which can effectively provide the driver with safe driving direction.
Solar power design, using LED as light source, energy saving and environmentally friendly.
It is recharged by solar panels under sun light, automatic charging during the day, automatic lights up at night.
Durable casting aluminum construction can deal with the outdoor environment, durable and waterproof.
