2.8inch LCDdigital Infrared Thermal Imaging Thermal Imager Temperature Detection

characteristic: This is a hand-held multi-function thermal imager with the characteristics of small size and light weight. With a 2.8 "TFT display, the data is clear at a glance. It can be used in many occasions and is an indispensable tool for home and industrial use. This equipment is designed in an integrated way and can work without external equipment. The screen display parameters are shown in the figure below Taking pictures: In the power on state, press the picture taking/reset key to save the current image. View or copy images: After connecting the computer with USB-C data cable, press the mode switch key to switch to the U disk mode to read or copy images. Reset: The body can store 99 images. When the storage is full, press and hold the photo/reset key until the screen flashes and release it. The device will reset, and the initial state can be restored after about 15 seconds. Note: This device uses 3.7v lithium battery for power supply. It is recommended to keep the battery power display at about 50% before long time out of use features: -Measuring range: - 40 ℃ to+300 ℃, 8Hz dynamic refresh rate -2.8 "screen resolution is 320 * 240; the screen can display and track the maximum temperature, minimum temperature and center point temperature -The shell is made of FR4 epoxy sheet, which better protects the internal components and has a long service life -Small size, easy to carry -Lithium ion battery power supply. USB-C charging; Up to 4 hours battery life. Can be used while charging -Built in SPI Flash chip, which can store 100 pictures. View and copy image files by connecting a data cable to a computer or mobile phone -Integrated design without external equipment Specifications: -Material: epoxy resin board+printed circuit board -Infrared sensor: MLX90640ESF-BAB -Hardware resolution: 32 * 24 pixel far-infrared array -screen resolution: 320 * 240 pixels -Temperature measurement range: - 40 ℃ to 300 ℃, -Measurement accuracy: ± 2 ℃, -Operating temperature: 0 to 50 ℃, -Working humidity: ≤ 70% -Refresh rate: 8Hz -Field of vision: horizontal 55 ° x vertical 35 ° -Emissivity: 0.95 -Charging specification: USB Type-C5V/1A -Product size: 85 * 55 * 30mm -Battery: 3.7V 800mAh lithium ion battery -Working time: ≥ 4 hours Application: -High precision non-contact temperature measurement -Security and intrusion detection -Body temperature detection -Ambient temperature measurement and control of intelligent buildings -Automobile air conditioning control -Microwave oven and oven temperature detection and control -Temperature Monitoring of Industrial Parts -Visual temperature sensor -Side leakage and maintenance of floor heating equipment -Thermal detection of circuit boards and components Packing list: 1 * Thermal imager 1 * Mirror wiping cloth 1*USB Type-C