Feature:
1. WORKING PRINCIPLE: Distinguished from ordinary traditional mechanical locks, it does not have a keyhole, through the password disk for unlocking and locking. The four digit password consists of 1,2,3,4 four digit combination, can be combined into 256 combinations, and the original password is 1234.
2. BATTERY INSTALLATION METHOD: Twist open the battery cover screws, load three AAA batteries, and make sure that the polarity of the battery is correct, then you will hear the 'tick tick' sound, and then cover the water resistant silicone, cover the battery cover, lock the two battery door screws (Note: Screws must be tightened, otherwise it will cause the automatic alarm after locking).
3. LOCK: Insert the lock into the bottom, press the center button, hear 'tick tick tick' three times, at this time push the side lock lever, the button can not pull out the lock means it is locked. The LED light will flash once in 3 seconds when it is locked. (Note: 5 seconds after locking into the alarm detection state. If the alarm is triggered, please enter the password and the center button to close the alarm).
4. ALARM: (Alarm can stop automatically in 30 seconds, or enter correct code to stop alarm immediately) Alarm will be activated if you input wrong code three times when locking. Removing the back cover screws when locking will alarm, and the alarm will not stop until the battery is removed or the correct password is entered to stop the alarm immediately. Cutting the wire rope when locking will alarm until inputting the correct code can stop the alarm immediately.
5. UNLOCK: In lock mode, enter the code (original code 1234) and the center button, a long 'tick' tone will be heard and the LED light will turn off, indicating that the lock has been unlocked. At this time, press and hold the lock lever button, then you can pull out the lock.
6. VIBRATION ALARM: Alarm can be stopped automatically for 30 sec, input correct password to stop the alarm immediately. 5 sec after locking, it will sound a warning sound for one second and vibrate for 3 sec. If no one touches, it will enter redetection state after 15 sec. Make sure the host is not locked, the vibration alarm mode can be selected off and on. The method is to press and hold the 2 button for 3 sec, and let go when you hear 'tick' once. To turn it on, press and hold the 2 button for 3 sec and let go when you hear 'tick' twice.
7. LOW BATTERY ALERT, APPLICATION: When the battery is low, the LED light will flash 1 time every 1 second. Please replace the batteries promptly at this time, otherwise it may cause the sound to become less audible. Suitable for items and occasions such as luggage bags, vehicles, homes, stores, etc. This lock is designed with push buttons and does not require a key. It can serve to protect items, deter outside intruders and alert the owner.
Specification:
Item Type: Password Lock
Material: Copper, ABS, Steel Wire
Battery Type: AAA Batteries (Excluded)
Battery Quantity: 3pcs
Original Password: 1234
Battery Life: Standby Mode, Approximately 8 Months Or More
Cord Specification: Diameter: 10mm / 0.39in, Length: 80cm / 31.5in
Operating Temperature: -20℃-+60
Storage Temperature: -30℃-+80℃
Function Characteristics:
1. Immediate alarm when the lock is shaken or moved
2. Alarm immediately when cutting the rope or removing the screws of the lock body.
3. Alarm will be activated immediately when three wrong passwords are lost.
4. Alarm sound reaches more than 110 decibels
5. Wire rope diameter of 10 millimeters, length of 80 centimeters
6. 4 digit code, the combination of the code up to 256 groups
7. Lock and unlock through the button, no need for keys
8. 3 AAA batteries power supply, and has a low power prompt function
9. IP44 certified water resistant, suitable for indoor and outdoor use.
10. Can be used normally in temperatures from -20℃ to +60℃.
Package List:
1 x Motorcycle Password Lock
1 x Screwdriver
1 x Instruction Manual
