Lens Plate for SONY FE F4 Macro G SEL70200G2 Compatible Product Video Japanese F-Foto 70-200mm OSS / (with Boss, Company) LP-S70200G2

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.

[About clocks that synchronize time via radio waves] The function of clocks that synchronize time via radio waves only works in the Japanese area. Please be careful. [Product Overview] Arca-Swiss compatible lens plate with video boss compatible with SONY E-mount telephoto zoom lens FE 70-200mm F4 Macro G OSSⅡ (SEL70200G2) lens. (Please note that it cannot be attached to the early model 70-200mmF4 (SEL70200G). [Product Features] When attaching the lens to the camera head, it is a screw type, but by using this product, it can be attached with one touch. FE 70-200mm F4 Macro G OSSⅡ (SEL70200G2) can be attached to and removed from the camera head. The total length of the pedestal for the lens is 40mm.The length of this lens plate is 55mm, so the lens plate protrudes from the front and back of the pedestal.When shooting handheld, the lens plate gets in the way. If so, rotate the tripod mount 180 degrees so that it faces upwards. [About installation] The Arca-Swiss compatible shape is not a shape that is clearly defined by the standard, so there are cases where it cannot be installed with some products (especially lever type). In the unlikely event that a product is not listed here and you find that it cannot be installed after purchase, please contact us. [Camera heads whose installation has been confirmed] RRS BH-30, Leofoto G4, ARCA-SWISS P0 hybrid, Vanguard BH-50, Neewer ball head, TYCKA free head, Neewer QR clamp, SUNWAYFOTO DLC-60LX, MENGS CL- 50S, DC-38Q, RRS B2-LRII [Unmountable pan head] We are currently collecting information, so please contact us. [About F-Foto] [Founded in 2012] A Japanese camera accessory manufacturer. (Headquarters are in Gunma Prefecture) [Online-only] As we are an online-only manufacturer with no stores, we are able to deliver high-quality products to our customers at reasonable prices. [Many highly rated products] We have many original products that are ranked #1 and highly rated (over 300 reviews, etc.), such as shoe covers, tripod mounts, lens plates, and compatible hoods. [High quality (inspected at domestic factories)] All products manufactured at overseas factories are inspected at domestic factories and delivered to Amazon warehouses. [Safety guarantee] In the unlikely event of initial defects, etc. If there is, we will provide replacement support, etc., so please purchase with confidence. [Material, etc.] The material is made of aluminum and is colored black with a hard alumite finish after cutting. It is machined from an aluminum block, so it is highly rigid and very sturdy. We have disclosed the detailed dimensions of the plate. If the tripod pedestal for each lens matches the dimensions of the plate, it can be used with other lenses as well. One 1/4 screw for fixing is already installed, but it can be removed or replaced. The video boss is made of brass and is fixed with screws, so it can be removed. [Installation method] The genuine tripod mount has a screw hole and a hole that corresponds to the video boss. The lens plate has one fixing screw (1/4 screw), so align the boss of the lens plate with the video boss hole of the tripod mount, align the fixing screw with the screw hole, and insert a coin, etc. Tighten the screws using the [Other features] Comes with 2 stopper screws and a tool to prevent it from falling off when attached to a pan head. [Cameras that cannot be installed] There is a hole for the video boss on the bottom of Nikon Z7, etc., but because the hole diameter of Nikon is small, this lens plate cannot be installed as is on Nikon Z6, Z7, etc. . [Product Overview] Arca-Swiss compatible lens plate with video boss compatible with SONY E-mount telephoto zoom lens FE 70-200mm F4 Macro G OSSⅡ (SEL70200G2) lens. (Please note that it cannot be installed on the early model 70-200mmF4 (SEL70200G). [Product Features] When attaching the lens to a pan head, it is screwed down, but by using this product, it can be attached to and removed from the pan head with a single touch. [Installation method] The genuine tripod mount has a screw hole and a hole that corresponds to the video boss. The lens plate comes with a metal video boss and one fixing screw (1/4 screw), so align the boss of the lens plate with the video boss hole of the tripod mount, and insert the fixing screw into the screw hole. Align and secure by tightening the screws using a coin, etc. [Material, etc.] The material is made of aluminum and is colored black with a hard alumite finish after cutting. It is machined from an aluminum block, so it is highly rigid and very sturdy. The video boss is made of brass and is fixed with screws, so it is possible to remove the boss. [Other features] Comes with 2 stopper screws and a tool to prevent it from falling off when attached to a pan head. The total length of the tripod mount for the FE 70-200mm F4 Macro G OSSⅡ (SEL70200G2) lens is 40mm. The length of this lens plate is 55mm, so the lens plate protrudes from the front and back of the pedestal. If the lens plate gets in the way when shooting handheld, rotate the tripod mount 180 degrees so that it faces upwards.