BERM Surge Protective Devices House Arrester Protector 4P 40KA SPD 2 Level BEMLY40 /380V

Feature: 1. For Less Than 200kA Electrical Circuit: The arrester module(surge protector) is mainly suitable for 50Hz(or 60HZ) impulse current capacity not greater than 200kA in the electrical circuit 2. Absorb, Consume or Discharge Surge Current: Limit transient overvoltage amplitude, absorb, consume or discharge surge current energy 3. Convert to Lower Overvoltage Category: In the case of a higher overvoltage category, the electrical components to be protected can be converted from one overvoltage category to another lower overvoltage category 4. Electrical Appliances Protection: Suitable for the protection of electrical appliances in households and similar places when there is an induced overvoltage in the line, and when operating overvoltage occurs 5. TH35mm Wide Rail Installation: Installation method is matched with TH35mm wide rail, easy to install and use Specification: Item Type: Surge Protective Devices Product Model: BEM-LY40 Product Specifications: 4P40KA Maximum Discharge Current: 40KA Nominal Discharge Current: 20KA Response Time: ≤25nS Ambient Temperature: -40℃~+80℃ Altitude: Not more than 2000meter Relative Humidity: Not more than 90%(25℃) Package List: 1 x Surge Protective Devices Note: 1. The indicator window of the module is green (normal). When the module deteriorates, the indicator window turns red and must be replaced in time. 2. The surge protector can be equipped with (FS) remote remote signal alarm. The remote signal contact has one normally open and one normally closed. If one or more modules of the surge protector fail, the contact will be closed and a fault alarm signal will be sent. Indicates that the module is faulty and must be replaced. 3. Frequently check the air switch or fuse on the serial line.