PH0‑14 Value Detection Sensor Module Waterproof Digital Probe Monitor Kit BNC Connector

Feature: 1. [MAIN PURPOSE] PH value detect sensor module and PH waterproof digital probe kit, mainly used for PH value monitoring and control. 2. [APPLICABLE USAGES] BNC connector fits most PH meters and controllers, widely used in aquariums, hydroponics, laboratories, etc. 3. [WIDE USE RANGE] The detectable concentration range is PH0‑14, which makes the PH value sensor module have a wider application range. 4. [HIGH EFFICIENCY] The response time of the sensor sensor is ≤5S, the stabilization time is ≤60S, efficient and convenient in operation. 5. [WITH WATERPROOF PROBE] Equipped with digital sensor probe, has good waterproof effect, with dual temperature compensation function. Specification: Item Type: PH Detection Sensor Working Current: 5-10mA Detectable Concentration Range: PH0-14 Detection Temperature Range: 0-100℃ Response Time: ≤5S Stability Time: ≤60S Component Power Consumption: ≤0.5W Operating Temperature: -10~50℃ (nominal temperature 20℃) Working Humidity: 95%RH (nominal humidity 65%RH) Terminal: BNC Connector Package List: 1 x PH Value Sensor Module 1 x Digital Probe Note: 1. Probe cannot be tested continuously for a long time 2. If you are using a Particle product like Photon or Argon, be aware of an error. It's a hardware issue with the analog port fluctuating voltage, enough to fluctuate your ph by 0.7 or more at these low voltage readings. To fix this, you'll need to add a 0.1uF capacitor between the analog port you're using and ground. 3. If you want to test PH value, you need to purchase PH test liquid separately, without test liquid you can only measure the temperature.