Feature:
1. Connection is convenient to maintain, using 2‑pin 5.08mm spacing terminal, easier to wire. Secure spacing in the middle, to use.
2. Using multi‑turn potentiometer of ultra‑long service life, highly wear‑resistant metal wire and high .
3. Power supply input has reverse input , self‑recovery function.
4. output has anti‑lightning , anti‑ESD static and anti‑interference .
5. Standard housing, convenient to install, large knob make sure good adjusting hand feeling.
6. Using 0.56in bright display to make sure a good display effect under long distance and strong light.
7. Input and output terminal uses anti‑reverse input function for safety and reliability.
Specification:
Condition: 100% Brand New
Item Type: Current Generator
Material: ABS
Model: CS-4-100MA
Product Overview
Connect the power supply to send 4-100MA constant current source control output, digital display the milliampere of the output current, the accuracy is decimal place. Various circuits are designed inner side, the output is pure, and the performance of the whole machine is stable and . The product can be used for: inverter control, PLC debugging, valve adjustment, instrument test, light-emitting diode test, analog transmitter output, source generation, etc. Meter housing, easy to install
Power input
V+: Connect to the positive terminal of the power supply
V-: Connect to the negative terminal of the power supply (GND ground wire)
Current output
C+: Positive terminal of output current
C-: output current negative terminal
1. The power input voltage is 7-30V (5V power supply can be customized). Pay attention to matching with the output load. The greater the internal resistance of the load, the higher the power supply voltage must be used to match. The specific matching calculation needs to find out many parameters In order to calculate it, most users do not have such conditions or do not have relevant information on hand. According to experience, it can be solved like this: Generally, you can choose any voltage power supply of 9V/12V/24V. If you find that the maximum current is not enough to 20MA In the case of, you can gradually increase the supply voltage to solve the problem of matching. In general industrial occasion, 24V power supply is enough.
2. Power supply current. In order to make sure the stability of the system, the power supply terminal of this product must have a current output capacity of at least 500MA.
3. Output coefficient <30MV.
4. The highest value of output voltage: input power supply voltage -0.9V.
5. Minimum output voltage: 0V (equivalent to the direct short-circuit state of 2 output lines)
6. Constant current average response time: real-time feedback control, fast speed...
7. Lowest static power consumption: 1.728W (72MA/24V,) output floating
8. Maximum working output power consumption: 4.8W (200MA/24V) maximum output.
9. Output current limit adjustment range: 3.3MA-102MA.
10. Output current adjustment control accuracy 3%
11. Temperature deviation accuracy: 3%
12. Humidity drift accuracy: 2%
13.Number size: 0.56 inch digital tube
Package List:
1 x Current Generator
