Car mounted inflation pump
Material: ABS
Power cord length: approximately 285cm
Product size:12*6.5*16cm
Package size:17*8*16 cm
MAX air pressure: 150psi
Rated voltage: DC12 (V)
MAX current: less than 10A
Inflation time: 5-8 minutes
Inflatable flow rate: 35L/min
Label:yes
Product features:
This machine is suitable for 12V car tires, as well as motorcycles, bicycles, balls, rubber boats, beach floats, inflatable toys, and more. When working on highways, outdoors, or in the morning, sudden tire leaks or tire injections can be more effective in emergency situations. Maintaining the correct tire pressure on car tires can ensure driving safety and save gasoline. It can be used with the car as a precautionary measure and has endless uses. Equipped with a complete set of inflation nozzles, it can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls, and other various purposes.
Instructions:
1. Insert the air nozzle on the rubber tube directly into the tire valve. When you hear the sound of air leaking out of the tire, it means that the air has circulated. Continue to tighten the air nozzle, and the air will no longer leak out.
2. Insert into DC12V cigarette lighter
3. When inflating, the gauge pointer rises with the saturation level of the tire. When the pointer reaches the appropriate tire pressure (generally 223kPa=35PSI for car tires), remove the plug and air nozzle to complete the work.
4. Please connect the professional ball needle and plastic nozzle equipped with this machine to the air nozzle to inflate the balls and other gas requiring equipment.
Matters needing attention:
1. Not suitable for inflating tires on large and overweight vehicles, such as trucks, vans, and container trucks;
2. Please start the car engine to enhance power when using, without consuming the car battery power;
3. This machine is limited to using DC (DC12V) power supply and cannot use household high-voltage AC (AC220V) power supply;
4. When inflating, please stop for 10 minutes after continuous operation to cool down, in order to prevent damage to the air pump and accessories, and to extend the life of the motor. When inflating the rubber boat, it can work continuously for 30 minutes;
5. Generally, when inflating a tire, it takes about 3-5 minutes to reach a normal tire pressure of 30 PSI, while larger tires take a slightly longer time; If the pointer of the instrument quickly rises to 50-100 PSI when starting to inflate, it indicates that the air is blocked and has not entered the tire. At this time, the air nozzle connector needs to be immediately unplugged and operated again, otherwise the motor and instrument are prone to damage.
6. Do not leave the body during use, pay attention to tire pressure at all times, and avoid over saturation;
7. After using this machine, the air nozzle wrench must be straightened to avoid rubber elasticity fatigue inside;
8. The plug of this air pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);
9. This machine should be kept away from moisture, heavy drops, and sand and mud intrusion, and should not be played with by children to prevent damage;
10. Each type of tire requires different pressures. Please refer to the markings on the side of the car tire or inquire with the car manufacturer
Notes :
1.Please allow 1-3 cm error because measured by hand, please refer to the Sizing Chart before choosing.
2.Because the screen brightness is different, the color may be slightly off, it is normal.
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.
