JCD 220V 60W Electric Soldering Iron 908 Adjustable Temperature Solder Iron With Quality Soldering Iron Tips and Kits

Using the soldering iron

1. After turning the iron on, the bit will commence heating and will be ready for use when the solder wire begins to melt at contact.

2. Initiate soldering by ensuring the melted solder makes a clean connection between the contacts that you attempting to solder.

3. Move the solder wire and iron away once enough solder is placed and wipe any residual solder using the wet sponge.

4. Always remember to switch the iron off at the mains and place it in the provided holder while it cools enough to be stored safely.

Notes:

1. Use safety goggles and take necessary precautions to avoid injury or fire.

2. The iron heats up quickly. Select a suitable temperature to operate at. Using the iron for long hours and at high temp may shorten the life of the product.

3. Make sure to only switch the iron on when required and switch it off when not, in order to reduce the risk of injury and fire.

4. Clean the soldering tip ever so often to extend its life. Avoid using abrasive chemicals and surfaces as this could damage the metallic surface.

5. The provided bits are 900M series and spares are available from where you purchased this product.