19*15 Rgbw 4 In 1 Event Focusing Stage Move Wash Light 300W Dmx512 19 Pcs 15W Zoom Led Moving Head Lights
Products DescriptionSpecifications:
Model: ZQ02253
Colour: Black
Material: Alloy+Plastic
LED: 19PCS*15W
Voltage: AC100V-240V
Frequency: 50Hz-60Hz
Fuse: 3A
Color temperature: 8500K
Zoom angle:7°-60°
Control mode: DMX512, Auto, master-slave, sound control
Exterior : high temperature resistant plastic + molded alloy material
Exterior color: black
Protection class: IP20
International standard control signal: DMX512
Channel number: 16CH/24CH/32CH
Number of motors: 3 silent motors in total
LCD interface, easy to operate, beautiful interface, and the interface can be reversed by 180 degrees.
The horizontal rotation of the X axis is 540°C, and the vertical rotation of the Y axis is 270°C, with automatic correction
positioning.
The X and Y axes can be adjusted and fine-tuned, and the software has a correction and positioning function, with high precision!
Dimming: 0-100% linear adjustment.
Strobe: Strobe speed (1-30 times/second), complete linear dimming and variable strobe speed.
Focusing: Using optical combination, the effect is far better than ordinary wash lights, and can project HD effect.
Overheating intelligent protection
Intelligent dimming control (extend the service life of the light source)
Product Features:
1. High brightness lighting effect. 19pcs 15W lamp beads, super brightness and high quality light output, smooth mixing, vivid
colours, create any colour you want.
2. Beautiful shape. Dazzling light, new and innovative appearance, selected high-quality five-sided lens, strong penetration.
3. Multiple control modes. dmx512, auto, sound control, master/slave. Perfect control of stage lighting for different occasions.
4. Made of light, strong and wear-resistant high temperature resistant plastic + moulded alloy material. Stable performance,
prolong the service life of the lamps.
5. Wide range of uses. Used for various scenes, DJ, karaoke, dance hall, KTV, disco, bar, cinema, church, club, Halloween,
Christmas, wedding, etc.
Safety warning!
In order to ensure your safe and correct use of lamps, please read the following safety tips carefully before use to avoid
unnecessary failures and injuries.
1. Non-professionals, do not disassemble the lamps and accessories inside the lamps without authorization.
2. AC power supply: check whether the local power supply meets the rated voltage requirements of the product.
3. The luminaire is designed according to the type of electric shock protection. The luminaire must be connected to a fully
grounded power supply system, and the ground wire of the luminaire must be connected to the ground wire of the power supply
system. Do not use a power cord with damaged insulation, and do not use it The power cord is bonded to other wires.
4. When installing and positioning the lamp, keep a minimum distance of 10 meters from any point on the surface of the lamp and
any flammable and explosive materials, and 2.5 meters from the irradiated object. Please do not install the lamp directly on the
surface of burnable materials.
5. The ambient temperature of the lamp: (- 10 degrees + 40 degrees), the maximum surface temperature of the lamp is 80 degrees,
and the lamp should be kept away from liquid substances and humid environments.
6. Before using the lamp, make sure that the lamp is well grounded, and do not install or remove any parts of the lamp while it is
live.
7. When installing lamps, the fixing screws must be tightened, and a safety cable must be added, and regular inspections must be
made.
8. It is recommended that the continuous working time of the lamp should not exceed 10 hours, and the interval between continuous
startup of the lamp should not be less than 10 minutes. Otherwise, it will not be triggered normally due to the overheating
protection of the bulb.
9. During use, if the lamp is abnormal, stop using the lamp in time.
10. When the bulb reaches the rated service life, it should be replaced in time, otherwise there will be a dangerous accident of
bubble explosion.
11. The rotating parts of the lamps and the pasting accessories must be checked regularly, and if they are loose or shaken, they
should be reinforced in time to prevent accidents.
12. The lamps are cooled by strong wind, which is easy to accumulate dust. It must be cleaned once a month, especially the cooling
air outlet, otherwise it will be blocked by accumulated dust, resulting in poor heat dissipation and abnormal lamps.
Packing List:
1. Moving head light *1
2. Power cord *1
3. Signal cable *1
4. Light hook *2
5. Screws *4
6. Instruction manual *1 Product Picture
