K.E.S Fully Isolated Power Supply [Strengthening] Voltage At No Load 9.4V Over KIP-001

In order to improve the sound quality of distortion systems, etc., the voltage is set to maintain 9.4~9.5V at no-load (output 1-4) All 5 ports fully isolated circuit Additional unit (KIP-AD5 sold separately) ) can be expanded by connecting with a cable DC output: 9V 500mA x 4/ 9,12,18V, switchable terminal: 500mA x 1 (2.1mm center negative), usage current capacity: up to 2A

>Power supply: Dedicated adapter 12V 2A (included), OLD PLATED DC cable (approximately 60cmX2 approximately 30cmX3) Do not connect or disconnect the DC cable while the power is on. The effector may be damaged. The warranty is also limited to this product only. KIP-001 has high voltage, low loss, and is structurally designed with the top surface of the casing as a heat sink, so the amount of heat conversion at high loads is large, and when operated under heavy loads. The top surface of the casing reaches a considerable temperature, but this is not a product defect. Since the KIP-001 is fully isolated, it is possible to support a current consumption of 1,000mA using a current doubler or daisy chain cable, but the top surface of the housing may become hot. We do not recommend using this product with products that consume a large amount of current, especially products that use a large capacity adapter (e.g. HX STOMP-3A, etc.).