SM-355 5L 350L/H 5W Submersible Aquarium Circulating Suction Water Pump Ultra-quiet Landscape Fish Tank Pond Water Fountain Pump
Feature:
High-quality ABS plastic support, wear-resistant and corrosion-resistant, longer service life.
The bottom of the pump comes with 4 fixed suction cups and a 1.5m long wire.
The bottom absorbs water 360°, effectively cleaning fish manure and impurities in the water tank.
Temperature control, built-in anti-dry burn protection.
The water pump can be started when the water level is 5cm, and can be as low as 0.4cm when pumping.
The water pump is equipped with two water outlet joints: 12mm/7.5mm, the water flow is 350L/H, and the maximum height can reach 0.8m (do not start the water pump in the dehydration state, you can fill the water outlet before starting).
The water pump does not need a transformer and can be used after connecting to the power supply.
Pure copper motor, low resistance, energy saving, smooth operation, very quiet, no need to worry about noise when using, providing a comfortable and quiet sleeping environment for you and your family.
High-performance stainless steel shaft, good shock resistance and wear resistance; ceramic rotor is quieter.
This submersible pump can be disassembled without tools, just drop the pump head and accessories into the water, clean the surface with a brush, and then reassemble.
The submersible pump is suitable for fresh water and salt water, and can generate water flow. It is very suitable for aquariums, drainage ditches and ecological pools, hydroponic systems, irrigation systems, breeding ponds, landscape houses, gardens, various handicrafts, small fountains, etc.
Specification:
Main material: ABS
Size: 78*70*58mm
Color: as shown
Power: 5W
Lift: up to about 0.8m
Flow: about 350L/H
Outlet hose connector size:
Outer diameter 12mm, inner diameter 8mm
Outer diameter 7.5mm, inner diameter 4mm
Power cord length: 1.5m/4.92ft
Uses: Wide range of use, can be used in aquariums, drainage ditches and ecological pools, breeding ponds, landscape rooms, gardens and various handicrafts, small fountains, etc.
The plug specifications and working information are as follows:
Plug Specification Voltage Frequency
EU 220-240V 50Hz
US 110V 60Hz
UK 220-240V 50Hz
Note:
When the pump is working, it must be completely immersed in water, so as not to burn the machine due to lack of water.
Please pay attention to cleaning the rotor shaft core regularly.
If there is a fault during use, please cut off the power supply as soon as possible, and repair it only after leaving the water.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
