This is a 3D silicone ice mold that can be used to make ice cubes. You can use it for various beverages, such as cola, juice, coffee, and milk tea.
A 1.3 centimeter sized ice cube is just right - suitable for quick drinking of cold drinks, but it can also guarantee about 10 minutes of ice making time. If the ice cube is too large, it will slowly cool the drink, and if the milk shake is too crushed, it will melt in one or two minutes, which is not durable enough
The mold is made of food grade silicone material+ABS, free of bisphenol A and odorless. It has great flexibility.
Simply pour the beverage into the mold and place it in the refrigerator for 4 hours to fully drink. Remove the ice cubes. Ears should be gentle/careful. Easy to operate, easy to demould, and easy to clean.
For friends or family who enjoy ice making, this will be a great gift idea.
Features:
1. Easy to retrieve ice - gently press the ice cylinder - ice cubes will fall off, making it easy to use
2. Simple Water Injection - Pour half of the water directly into the cup and complete the injection in 3 seconds, saving time.
3. Easy to use - stable sealing, not prone to leakage.
4. Space saving - compact and round, easy to place.
5. No additional storage required - once the ice is pressed, it can be poured directly into a water glass for easy enjoyment
6. Ice cubes that are exactly 1.3 centimeters in size - suitable for quick cooling of beverages, but can also guarantee a freezing time of about 10 minutes. Ice cubes that are too large will slowly cool the beverage, while milk shakes that are too crushed will melt in one or two minutes, making them not durable enough
Production steps:
1. Pull out the plastic inner tube and pour water into a silicone container, slightly more than 2 compartments and no more than 2 and a half compartments.
2. Slowly insert the inner tube with a cover into the silicone cavity, pay attention to rotating it all the way and holding it down, then gently pinch the silicone side under the cover to ventilate the inner tube and prevent it from floating.
3. Leave the mold at room temperature for a few minutes; If you don't want to wait and press hard, you can pour an appropriate amount of hot water into the inner tube, pour out the hot water for about 10 seconds, and then easily pull out the inner tube
4. Press on the outer wall of the silicone, continuously adjust the angle, and remove the ice cubes
Size: 9 * 8cm
Packaging included:
1 ice lattice mold
