The contactless tester allows you to check the voltage in wires or equipment without touching any wires or components. A device at the end that senses the voltage of such things as wires, sockets, circuit breakers, light cords, light sockets, and switches. You can get a reading by simply inserting the tip of the tester into a socket slot or even touching the outside of a wire or cable.
Features:
Turn OnOff the Tester: Turn on the tester: Press and hold the power button for over 1 second. Then, you will hear a single beep from the buzzer alarm, and the LCD screen will illuminate; Turn off the tester: When the tester is turned on, press the power button to turn off the LCD screen.
Identification of Neutral WireLive Wire: Please separate the two wires that need to be detected as far apart as possible and bring the probe close to the wires. If it is a socket, put the probe into the jack. The one that has a strong induction signal is the live wire, while the one that has a weak or no induction signal is the neutral wire.
Adjustable Sensitivity with Dual Range: The default AC voltage test range is about 48V-1000V. Press the AC voltage test range switch key, and then "HS" is shown on LCD. The detectable range is about 12V-1000V. Press the AC voltage test range switch key again, then the "HS" disappears. The detectable range is about 48V-1000V.
Portable Pencil Hook: For it"s weight or overall design, this pen is as easy to carry as a regular pen. The design of the pencil holder enables you to carry the pen anywhere you want. You can take it away directly in your pocket after use, without occupying much space.
Auto Shutdown: The tester will automatically shut down if it is left idle for approximately 5 minutes and no AC voltage signal is detected.
High-Definition LCD Screen: When testing the voltage, the brightness bar on the screen will tell you the voltage intensity; The screen will light up in red to distinguish the livenull wire; When the battery voltage drops to less than 2.5 V, the flashlight of LED display reminds you to replace the battery.
Specifications:
Material: ABS
Color: Black
AC Voltage Range: 12V~1000V (sound and light alerts within the detection range); 48V-1000V
Frequency: 50Hz 60Hz
Buzzer Alarm: Sound and light alerts
Flashlight: White LED lighting
Auto Shutdown: About 5 minutes
Low Battery Voltage Alert: About 2.6V
NeutralLive Wires: According to the intensity of the induction signal, the live wire is the one that emits the stronger signal
Induction Intensity: High, medium, low
NCV Sensitivity: Press the button to select high sensitivity or low sensitivity (default)
Operating Temperature: 0 celsius ~40 celsius
Storage Temperature: -10 celsius ~50 celsius
Altitude: less than 2000m
CAT Rating: CAT. III 1000V
IP Rating: IP67
Drop Test: 1 meters
Power Supply: 2 * 1.5V AAA batteries
Applicable Standards: IEC 61010-1, IEC 60529-2013
Item Size: 165 * 23 * 23mm 6.49 * 0.91 * 0.91in
Item Weight: 62g 2.18oz
Package Weight: 80g 2.82oz
Package Size: 18 * 3 * 3cm 7.08 * 1.18 * 1.18in
Package List:
1 * Voltage Tester
2 * Batteries
1 * User Manual (English)
