402/151/50PCS Horizontal Wedge Gasket Kit, Used for Floor Wall Tile Leveling System Level Gauge Positioner

Feature: Wearable and recoverable. Easy to carry out DIY operation. Keep the tile balance in the same horizontal position. Improve tile installation speed. Reduce fatigue/stress of installers. Almost no slippery, flat surface. Reduce the need for grinding and polishing. Prevent the tiles from moving during curing.

Specification: Material: PE Place of origin: China Suitable spacer: 2mm-8mm spacer Tile thickness: 5mm-20mm

Use tip: 1. Lay the first tile, leaving a distance of more than 2mm (used with cross spacers). Close to the tiles. 2. Insert the T-shaped needle along the tile gap. 3. Then rotate 180 degrees to clamp the T-shaped needle at the bottom of the two tiles. 4. Use your hand/special wrench to adjust the cover until both tiles are on the same level. 5. About 5-6 hours after leveling, before the cement/adhesive is completely dry, rotate the cap in the opposite direction and remove the 180° T-shaped needle until the words are taken out.

Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.

Packet List:： 402/ set: 300 Tile Spacers + 100 Pcs Leveler + 2 Pcs Wrench 151/set: 50 X Tile Spacer+ 1 X Tool+100 X Tile Leveling Spacers 50 /set：50 X Tile Spacer+ 1 X Tool The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.