Type-C 18650 Battery Charger UPS Module 15W Fast Charge Boost 5V 9V 12V Output for Camping Portable Power Supply

Friendly Reminder: Batteries are NOT included in this package, please check before you purchase.

Basic Parameters: Power Input: DC5V or USB Type-C port Output Specs by Model: HW-465A (5V 3A), HW-465B (9V 1.6A), HW-465C (12V 1.2A) Maximum Rated Output: 15W Charge Cut-off Voltage: 4.2V ± 1% Over-discharge Protection Threshold: 2.5V Standby Power Consumption: Approx. 10mA Widely Used For: Uninterrupted power supply for all kinds of network and security gadgets, including routers, switches, surveillance cameras, infrared alarm systems, etc.

Outstanding Features: * Seamless power switching: Automatically charges when grid power is available, switches to backup battery power immediately once power goes out, no shutdown or interruption for your devices * Clear LED status lights: On-board indicators show charging progress, full charge status and output working status clearly * Full-round battery protection: Built-in protection circuit keeps your lithium battery safe from overcharging, over-discharging, overcurrent and overheating issues * 3 optional output voltages: Pick the 5V, 9V or 12V model based on your device's power requirement * Expandable battery capacity: The battery holder supports parallel connection of multiple battery packs to get larger capacity and more stable charge/discharge performance * 2 input options: Support both DC 5V and USB Type-C power input, easy to get power access in different scenarios.

Attention Points: 1. Always wire the device strictly following the instruction diagram to avoid misconnection 2. Double check the positive and negative poles of the battery before installation, wrong polarity will damage the device 3. Add extra cooling measures if the product gets too hot when charging and discharging at the same time 4. If the output cuts off for protection due to wrong wiring or accidental short circuit, solve the problem first then reconnect to a 5V USB power source to reactivate the output.

Operation Guide: Step 1: Connect your lithium battery to the battery holder on the back of the module Step 2: Connect the module to 5V input power Step 3: Link your load device to the UPS positive and negative terminals Once the battery is connected, the red output indicator will turn on. When you plug a charger into the Type-C port with a data cable, the charging indicator will show if the battery is charging or fully charged. When external power is connected, the module powers your load and charges the battery at the same time (please use an input power supply that can deliver 3A or higher current). When external power is disconnected, it switches to battery power instantly with no delay. Output will be shut off for protection when battery voltage drops below 2.5V, and the red indicator will flash when overheat or overload is detected. * Parallel connection of multiple batteries via the holder is supported to deliver more stable and sufficient power for your devices. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.