Akyurabo Lens Frenzy1x22x26 for Protector/VectorOptics SCRD-36/37 [ACLB-0187]

Material: Polycarbonate Thickness: 2mm Compatible products: VectorOptics Frenzy1x22x26 for SCRD-36/37 This product is shipped by Amazon. For VectorOptics Frenzy 1x22x26 SCRD-36/37. Among the three Frenzy brothers, the Frenzy 1x22x26 has the most circular lens shape and protrudes forward. There are two types, MOS (SCRD-36) and AUT (SCRD-37), depending on whether they are automatic dimming or motion sensors, but they have similar shapes, so we will sell them as compatible with both. A feature of the product is that the convex part of the lens protrudes forward to the very edge of the lens frame, so a 1mm or 1.5mm thick polycarbonate plate would not provide sufficient protection (the deformed polycarbonate plate would hit the lens convex part when pressed with a finger), so a 2mm thick polycarbonate plate was used. We use super strong double-sided tape made by 3M, so once it's firmly attached, it sticks so tightly that it's difficult to remove it with your bare hands. Precautions for use We do not guarantee 100% protection. Please replace any deformed or cracked protectors as soon as possible. Regarding "fake dots" When used on dot sites, another "fake dot" may appear in addition to the original dot. Installed in front of the objective lens, which also serves as a mirror. The above specifications are unavoidable. It is thinner than the original dot, and is projected at a very short distance, so if you focus your eye on the original dot that is projected at a long distance, it will hardly interfere with your aiming.