AZDEN Gun Microphone Stereo Monaural SMX-30II

Frequency characteristics 40-20,000Hz Sensitivity -36dB at 1kHz (0dB=1V/Pa) Impedance 50Ω (at 1kHz) Dynamic range 118dB Accessories Windshield, pouch, Φ3.5mm stereo mini cable two microphones in one The SMX-30II is a microphone that allows you to switch between stereo and monaural with a single switch. This single microphone achieves optimal sound collection according to the shooting scene. If you select the stereo mode, two cardioid microphone units separated at a 120° angle will operate, allowing you to record realistic sounds when photographing nature, urban environments, concerts, etc. In monaural mode, a supercardioid microphone unit similar to the SGM-250 operates, ensuring that the desired sound is captured. When the subject or musical instrument is at the edge of the screen, the oscillating mechanism allows the microphone body to move approximately 30 degrees left and right. By pointing the microphone at the center of the subject, you can reliably capture a more focused sound. low cut switch Attenuates low frequency levels below 120Hz to reduce noise from air conditioners, wind, traffic, etc. Uniquely developed power supply “Auto” mode By connecting to the camera, it automatically detects whether the camera is turned on or off, and the microphone is also linked to turn battery power on and off, preventing battery consumption due to forgetting to turn off the power. 3 stage gain control Gain is switchable in 3 stages: +20dB/0dB/-10dB. In a quiet environment such as an indoor interview, reduce the gain on the camera side and select +20dB to minimize noise from the camera's preamplifier. Distortion can be suppressed by selecting -10dB when collecting sound in a lively environment such as a concert or sporting event. The uniquely designed shock mount reliably reduces vibrations and noise that occur during shooting. You can attach it to a tripod or boom pole using the 1/4 inch female thread on the bottom of the camera mounting shoe mount. By firmly fixing the cable to the cable stop on the shock mount, you can reduce the noise generated when contact occurs.